amity solved assignment Business Environment & Carbon Finance

Business Environment & Carbon Finance

 

 

1          What are the different health issues related to marine, tank car, and tank truck loading and unloading

 

2          Describe the reciprocating compressor – gas recovery.

 

3          Discuss various fire & safety issues in regards to gas and air compressors.

 

4          Define compressors.

 

5          Discuss about Rescue & Emergency Services briefly

 

6          Standby Personnel briefly.

 

7          List duties of Authorized Entrants.

 

8          Define OISD.

 

Case Detail:

There is no case study you need to answer the questions

 

1.         Explain the concept of MSDS briefly.

 

2.         Discuss about HAZCOMM.

 

3.         Discuss 10 various hazardous classes of decontamination.

 

 

Assignment C

 

Question No: 1

A geometric form (e.g. circle, triangle or rectangle) containing a safety symbol, wording or both, is known as the:

 

1. Hazards
2. Safety Standard
3. Colour Coding
4. Safety Sign

 

Question No: 2

Initial ………. must provide the employees with the understanding and skills needed to perform the entry safely.

 

1. Assistance
2. Documentation
3. Training
4. Help

 

Question No: 3

Workers performing decontamination procedures must also be protected from possible exposure to hazardous:

 

1. Material
2. Gases
3. Solids
4. Substances

 

Question No: 4

Protective clothing, equipment, and other tools may be surveyed with sensitive monitoring devices such as:

 

1. Swipe Tests
2. Laboratory Analysis
3. Ionization
4. hoto-ionization

 

Question No: 5

The hazardous substances are classified into various classes and inflammable liquids comes under:

 

1. Class 1
2. Class 2
3. Class 3
4. Class 4

 

Question No: 6

A Material Safety Data Sheet [MSDS] is a manufacturer-prepared written document concerning a:

 

1. Material
2. Chemical
3. Inventory
4. Hazard

 

Question No: 7

When new or updated MSDSs are received, a copy will be forwarded to the

HAZCOM manager for review of:

 

1. Hazards
2. Severity
3. Completeness
4. Effectiveness

 

Question No: 8

The area designated for decontamination is usually referred to as the contamination reduction:

 

1. Unit
2. Systems
3. Corridor
4. Containers

 

Question No: 9

The contamination reduction corridor should be clearly marked so that entry and exit points can be carefully:

 

1. Controlled
2. Monitored
3. Managed
4. Cared

 

Question No: 10

When a worker temporarily exits the exclusion zone, decontamination (or decon) does not need to be as thorough as for workers leaving the site at the end of a:

 

1. Job
2. Assignment
3. Work Shift
4. Duty

 

Question No: 11

The purpose of the safety signs is to attract attention rapidly to a danger and to facilitate its:

 

1. Identification
2. Result
3. Severity
4. Accidents

 

Question No: 12

The ………… program must also designate the persons who are to have active roles in entry operations.

 

1. Written
2. Spoken
3. Signed
4. Directed

 

Question No: 13

What procedures are designed to protect workers in confined spaces from outside hazards?

 

1. Turnkey
2. Group
3. Isolation
4. Team

Question No: 14

Which of these is a type of atmospheric hazard?

 

1. Flammable gases or vapors
2. Poisonous sprinklers
3. Excess of CO2
4. Excess of Oxygen

 

Question No: 15

There are a number of ways in which atmospheric hazards can occur in a ………… space.

 

1. Open
2. Large
3. Spacious
4. Confined

 

Question No: 16

HAZCOM requirements provide a regulatory mechanism to inform employees of hazards associated with chemicals found in the:

 

1. Containers
2. Vessels
3. Material
4. Workplace

 

Question No: 17

Safety signs and signals are used in the workplace to warn and instruct staff and others of risks to their safety and:

 

1. Accidents
2. Hazards
3. Fire
4. Health

 

Question No: 18

Provision of which act makes it mandatory to post safety signs on hazardous chemicals and materials to correctly identify their nature of hazard and exercise necessary safety precautions in handling of such materials?

 

1. Manufacturing Act 1948
2. Hazardous Material Manufacturing Act 1989
3. Workman Safety Act 1948
4. Indian Factory Act 1948

 

Question No: 19

Contrast colors - neutral color, or white or black, are used as a contrast in combination with the safety color or with the auxiliary color to enhance the effect and sensitivity of the:

 

1. Messages
2. Eyes
3. Hazards
4. Information

 

Question No: 20

In order to complete safety signs, certain symbols may be used within the:

 

1. Mathematical Forms
2. Analytical Forms
3. Geometrical Forms
4. Pictorial Forms

 

Question No: 21

The standard is intended to protect workers from ………….. of entry into permit required, confined spaces.

 

1. Accidents
2. Hazards
3. Dangers
4. Safety

 

Question No: 22

Lubricating oils and waxes are refined from the residual fractions of atmospheric and –

 

1. Distillation
2. Heat Distillation
3. Vacuum Distillation
4. Metal Distillation

 

Question No: 23

Control of treater temperature is important as phenol can cause corrosion above –

 

1. 100° F
2. 200° F
3. 300° F
4. 400° F

 

Question No: 24

Batch and in-line blending operations require strict controls to maintain desired product –

 

1. Safety
2. Quality
3. Storage
4. Distillation

 

Question No: 25

Additives in drums and bags need to be handled properly to avoid –

 

1. Strain
2. Spoils
3. Spills
4. Spoilage

 

Question No: 26

Heat exchangers use either steam or hot hydrocarbon transferred from some other section of the process for heat –

 

1. Controller
2. Extinguishers
3. Output
4. Input

 

Question No: 27

A means of providing adequate draft or steam purging is required to reduce the chance of explosions when lighting fires in –

 

1. Heat Cooler
2. Heat Extinguishers
3. Heat Exchangers
4. Heater Furnaces

 

Question No: 28

A coded sound signal which is released and transmitted by a device designed for that purpose, without the use of a human or artificial voice, is known as the:

 

1. Safety Signs
2. Verbal Communication
3. Hand Signal
4. Acoustic Signal

 

Question No: 29

Steering Committee of OISD, comprising of Principal Panelists from the …… industry, meets twice a year under the chairmanship of Executive Director, OISD to review various activities of OISD.

 

1. Oil
2. Petroleum
3. Steel
4. Coal

 

Question No: 30

The physical mixture of a number of different liquid hydrocarbons to produce a finished product with certain desired characteristics, is known as –

 

1. Distillation
2. Blending
3. Gasoline
4. Heat Exchanger

 

Question No: 31

Lubricating oils and waxes are refined from the residual fractions of atmospheric and –

 

1. Distillation
2. Heat Distillation
3. Vacuum Distillation
4. Metal Distillation

 

Question No: 32

Additives are added during and/or after blending to provide specific properties not inherent in –

 

1. Gasoline
2. Carbons
3. Chlorofluorocarbons
4. Hydrocarbons

 

Question No: 33

Ignition sources in the area need to be controlled in the event of a –

 

1. Loss
2. Accident
3. Damages
4. Leak

 

Question No: 34

The process of decontamination consists of physically removing or neutralizing hazardous contaminants from:

 

1. Personnel
2. Materials
3. Workplace
4. Materials

 

Question No: 35

One of the most important parts of the standard operating safety procedures at any incident or hazardous waste site is the methods to minimize:

 

1. Loss
2. Contamination
3. Deformities
4. Accident

 

Question No: 36

Borders on safety signs improve sign effectiveness by highlighting contrast between the sign and its:

 

1. Appearance
2. Messages
3. Information
4. Surroundings

 

Question No: 37

Health Signs means signs referring to a specific object, activity or situation and providing information or instructions about safety and/or health at work by means of a:

 

1. Information
2. Geometrical Forms
3. Hording
4. Signboard

 

Question No: 38

One of the most effective ways to minimize confined space accidents is the ………./ tagout procedure.

 

1. Walkout
2. Turnout
3. Burnout
4. Lockout

 

Question No: 39

Before entry is authorized, the employer shall document the completion of measures required to prepare a space for entry by completing an entry ………...

 

1. Formality
2. Permit
3. Certificate
4. Map

 

Question No: 40

Periodic Safety Audits of all the …………. handling facilities are undertaken by OISD to see if any improvement in the facilities, training to the operating personnel, operating systems / procedures etc. is required.

 

1. Steel
2. Coal
3. Oil
4. Petroleum

Dear Student,

 

Solved assignment which is always available with us. We ensure you that the answer quality would be the best and you will get up to 90% to 100% marks in the assignments purchased from us. We have an expert on every subject working with us. The subject matter experts are highly qualified and deliver their best for you over and over again.

Please have a look at the price list mentioned below and send us a reply on this e-mail to let us know which assignment you want from us.

• Ready to use General Assignments – This assignment is ready to use assignment for every student. (The content of this assignment is the same for every student. You may risk getting your marks deducted by the university due to plagiarism.) We will provide you with all Sections of assignment fully solved: Section A, Section B, Section C.
• Customized, personal and exclusive Assignments- This assignment is personalized and customized just for you. The answers of this assignment would not be shared with any other student. The content of this assignment would be unique and we will delete it from our database after sending it to you exclusively. (This assignment would have 0% plagiarism). We will provide you with all Sections of assignment fully solved: Section A, Section B, Section C.
• Answers with online typing and filling assistance Assignments – This assignment is done by our staff members on your behalf. We will do it online by using your Amity user id and password. The answers we provide would be unique and will not be shared with any other student. (This assignment would also have 0% plagiarism) .We will provide you with all Sections of assignment fully solved: Section A, Section B, Section C. Please NOTE:  This assignment is same as Customized, personal and exclusive Assignments, in addition we provide you here online typing and filling by just an additional charge of Rs 300 only as typing charge.

Please note that you have to pay us in advance. All payment should be made in INR. As soon as we receive your payment, we will send you’re ready to use General Assignment within 10 minutes only. If you have opted for Customized, personal and exclusive Assignment, we will send the assignment within 5 hours of receiving your payment. If you have opted for Answers with online typing and filling assistance Assignment, we will send your assignment within 24 hours of receiving the payment. Customized , personal and exclusive Assignments and Answers with online typing and filling assistance Assignments  submission takes more time because we customize each and every word of the assignment just for you. So we request you to be patient.

 Our process

 

• Email or call us for which type of assignment you need: Ready to use General Assignments OR Customized, personal and exclusive Assignments OR Answers with online typing and filling assistance Assignments
• We will reply you with price list of assignment
• After you have made the payment please email us your payment details with Assignment Name and Type Preference at solvezone@gmail.com. We will send your assignment ASAP.

Pay Online

Now you can also make the payment online by the below mentioned link. We accept payments through Credit Card, Debit Card and Net Banking too.

http://solvezone.in/payments

Pay Offline

You can also pay us via NEFT / RTGS by visiting the nearest branch of your bank.

You can also deposit Cash by visiting the nearest branch of ICICI Bank.

 

  M.No. 08882309876 M.No. 08010058890 E-mail solvezone@gmail.com

 

Please email us your details with your contact number so that we can contact you.

Now you can  also enquire with our instant enquiry section

University:  AMITY Year:  2015